sma

sma

Quick Filter

Showing 13993 - 14016 of 15027 products

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-15250
Timken 15250X; 2-1/2" OD x 5/8" Wide; 0.06" Maximum Housing Fillet Radius; Standard Tolerance.

$19.31

Sold out

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-368A
Timken 368A, Steel; 2.0" ID.; 0.875" Width.

$43.28

Sold out

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-JLM104910
Timken JLM104910, 3.22" OD x 0.66" Wide; 0.02" Maximum Housing Fillet Radius; Standard Tolerance.

$17.91

In stock, 40 units

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-JLM104948
Timken JLM104948, 1.96" Straight Bore; 0.84" Wide; 0.12" Maximum Shaft Fillet Radius; Standard Tolerance.

$40.12

In stock, 30 units

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-LM102910
Timken LM102910, 2.89" OD x 0.62" Wide; 0.03" Maximum Housing Fillet Radius; Standard Tolerance.

$10.86

Only 4 units left

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-LM102949
Timken LM102949, 1.78" Straight Bore; 0.78" Wide; 0.14" Maximum Shaft Fillet Radius; Standard Tolerance.

$22.80

In stock, 18 units

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-LM12710
Timken LM12710, 1.78" OD x 0.47" Wide; 0.050" Maximum Housing Fillet Radius; Standard Tolerance

$7.44

Only 1 unit left

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-M12610
1.969" OD x 0.550" Width; Steel.

$8.02

In stock, 47 units

SMA TIMKEN TAPERED ROLLER BEARING SKU: 913-M12649
0.8437" Straight Bore; 0.7200" Wide; 0.050" Maximum Shaft Fillet Radius; Standard Tolerance.

$16.25

In stock, 18 units

SMA TIMKEN TRB CONE SKU: 308-462A

$92.42

Sold out

SMA TIMKEN TRB CUP SKU: 913-53375
Timken 53375, Standard Tolerance, Straight Outside Diameter, Steel; 3.75" OD.; 0.81" Width.

Sold out

SMA TIMKEN TRB SINGLE CONE <4OD SKU: 913-3795
Timken 3795 Tapered Roller Bearing, Single Cone, Standard Tolerance, Straight Bore, Steel, Inch, 2.0000" ID, 1.1930" Width.

$94.07

Sold out

SMA TINE BAR BEARING TB7623 SKU: 851-SMATB7623

$30.50

In stock, 19 units

SMA TINE CLIP FOR WHEEL RAKE SKU: 804-460657
Fits Tonutti, Vicon, others. 1.5" C-C mounting holes.

$4.52

In stock, 14 units

SMA TINE FOR BAKER FIELD CULTIVATOR SKU: 404-HSP80EO
1/2" thick, 1-3/4" wide, 29.75" overall length, hole for 5/8" bolt on tool bar end, 1 hole and 1 slot for 7/16" bolts on 1-1/2" to 2-1/4" centers

$122.06

In stock, 166 units

SMA TIP SKU: 878-H14VV8002
Standard VeeJet spray nozzles feature a high impact solid stream or flat spray pattern with spray angles of 0º to 110º at 40 PSI (3 bar). They produce a uniform distribution of small-to medium-sized drops. Specially tapered spray pattern edges provide even spray coverage when several nozzles with over-lapping patterns are required. Model H-VV VeeJet nozzles feature flow rates below 1 gpm at 40 PSI (3.9 I/min at 3 bar).

$6.53

In stock, 1646 units